SDSHobby
CARBON FIBER SUPPORTING TUBE D8*D6*L230MM WITH 3K TREATMENT FOR BUMBLEBEE ST550 RC QUADCOPTER
Specifications:, Outer Diameter:, 8mm, Inner Diameter:, 6mm, Length:, 30mm, Surface Treatment:, 3K,
SDSHobby
CARBON FIBER TUBE D14*D12*L170MM WITH 3K TREATMENT FOR BUMBLEBEE ST550 RC QUADCOPTER
Specifications:, Outer Diameter:, 14mm, Inner Diameter:, 12mm, Length:, 170mm, Surface Treatment:, 3K,
SDSHobby
CARBON FIBER FUSELAGE LOWER PLATE WITH 3K TREATMENT FOR BUMBLEBEE ST550 RC QUADCOPTER
Specifications:, Material:, carbon fiber, Surface Treatment:, 3K, Applications:, suitable for Bumblebee ST550,
SDSHobby
CARBON FIBER FUSELAGE UPPER PLATE WITH 3K TREATMENT FOR BUMBLEBEE ST550 RC QUADCOPTER
Specifications:, Material:, carbon fiber, Surface Treatment:, 3K, Applications:, suitable for Bumblebee ST550,
SDSHobby
CARBON FIBER PATRON SAINT RC GASOLINE BOAT/ RACING BOAT WITH JAPAN ZENOAH 29CC GAS ENGINE
| Hull Length | 133mm |
| Hull Width | 38mm |
| Hull Height | 21mm |
| Hull Speed | 70-75km/h |
| Hull Material | carbon fiber |
| Gross Weight | 14KG |
| Engine | Japan Zenoah 29CC Gas Engine |
| Propeller | 6717 3 blades copper prop |
| Shaft System | D6.35 Shaft Jointer, D6.35mm Flexible Shaft, D6.35mm Drive Shaft without Teeth, D6.35mm Drive Dog |
| Radio Control System | 2.4G 2 channels or 3 channels (Our Item No. |
| Servo | 6kg-cm Throttle Servo, 15kg-cm Steering Servo with metal gears |
Specifications:, Recommended Equipments (need to buy separately):,
NOT Including ClutchSDSHobby
EXTRA LONG ALUMINUM ALLOY 160 SINGLE RUDDER L150*H160 WITH 5.5MM DOUBLE WATER PICKUP FOR RC BOAT
| Outside Diameter of Water Pickup | 5.5mm |
Specification:, :150mm, :160mm, Features:,
Length of Rudder Height of Rudder It’s double suction hole. ...SDSHobby
EME 120CC GASOLINE ENGINE/ PETROL ENGINE FOR RC MODEL GASOLINE AIRPLANE
| Displacement | 120cc |
| Weight | 2400g /engine, 160g/muffler, 150g/ignition |
| Carburetor | EME |
| Compression Ratio | 7.6 |
| Power | 12.2HP@7000RPM |
| Practical RPM | 1100~7200RPM |
| Thrust 1 | 27.2kgf (50~200M altitude) |
| Thrust 2 | 24.7kgf (1800~2000M altitude) |
| Spark Plug | EME/ NGK CM6 |
| Ignition Voltage | 4.8V~6.0V |
| Fuel | 91~93 Octane, 1 |
| Recommended Propeller | 2 blades 28*10, 28*12, 29*10 prop, or 27*12 3 blades prop |
Specifications:, Package Contents:, EME120 engine*1pcs,
Muffler*2pcs Ignition module*1pcs Spark plug*2pcs Stand-off spacer*4pcs Muffler screw*4pcs Muffler ...SDSHobby
EME60 60CC GASOLINE ENGINE/ PETROL ENGINE FOR RC MODEL GASOLINE AIRPLANE
| Displacement | 60cc |
| Weight | 1390g/engine, 180g/muffler, 140g/ignition module |
| Carburetor | Walbro |
| Compression Ratio | 7.6 |
| Power | 6.2HP@7200RPM |
| Idle RPM | 1350RPM |
| Practical RPM | 1350~7500RPM |
| Thrust 1 | 16.2kgf (50~200M altitude) |
| Thrust 2 | 14.7kgf (1800~2000M altitude) |
| Spark Plug | EME/ NGK CM6 |
| Ignition Voltage | 4.8V~6.0V |
| Fuel | 91~93 Octane, 1 |
| Recommended Propeller | 2 blades, 23*10, 24*8, 24*10(wooden prop, C.F. prop) |
| Spacer screw | M5*15 (front), 4pcs; M5*22 (rear), 4pcs |
| Spacer washer | M5*4 for rear mounting spacers |
Specifications:, Package Contents:, EME60 engine*1pcs,
Muffler*1pcs Ignition module*1pcs Spark plug*1pcs Stand-off spacer*4pcs Muffler screw*2pcs Muffler ...SDSHobby
EME35 35CC GASOLINE ENGINE/ PETROL ENGINE FOR RC MODEL GASOLINE AIRPLANE
| Displacement | 35cc |
| Weight | 960g/engine, 45g/muffler, 140g/ignition |
| Carburetor | Walbro |
| Compression Ratio | 7.6 |
| Power | 3.6HP@7100RPM |
| Idle RPM | 1550RPM |
| Practical RPM | 1550~7500RPM |
| Thrust 1 | 9.0kgf (50~200M altitude) |
| Thrust 2 | 8.1kgf (1800~2000M altitude) |
| Spark Plug | EME/ NGK CM6 |
| Ignition Voltage | 4.8V~6.0V |
| Fuel | 91~93 Octane, 1 |
| Recommended Propeller | 2 blades, 18*10, 19*10, 20*8(wooden prop, C.F. prop) |
| Spacer screw | M5*15 (front), 4pcs; M5*22 (rear), 4pcs |
| Spacer washer | M5*4 for rear mounting spacers |
Specifications:, Package Contents:, EME 35 engine*1pcs,
Muffler*1pcs Ignition module*1pcs Spark plug*1pcs Stand-off spacer*4pcs Muffler screw*2pcs Muffler ...SDSHobby
EFUEL RC AC/DC 15V 4A ADAPTOR POWER
| Input | AC 100-240V 50/60Hz 1.5A |
| Output | DC 15V 4A |
| Circuit power | 60W |
Specifications:,
LED indicator for power onSDSHobby
EFUEL RC MODEL AC 220V DC 6-15V 20A ADAPTOR POWER
| Input Voltage | 220-240V AC (Part No. PSU20ADU, PSU20AU) |
| Input AC Frequency | 50Hz/60Hz |
| Output Voltage | 6-15V DC±0.5V |
| Output Current | 20A±1A |
| Current Overload Protection | ≤21A 500MS |
| Input Fuse | 220V AC 3.15A Fuse |
| LCD Display | Voltage Precision ±0.3V; Current Precision ±0.3A |
| Output Voltage Ripple | L<100MV |
| Power Efficiency | >80% |
| Power Factor | >0.7 |
| Over Temperature Protection | <100°C |
| Cooling Method | Cooling Fan |
| Operating Temperature | 0-40°C |
| Operating Humidity | 0-90% |
| Dimensions (L*W*H) | 184.5*92*50mm |
| Net weight | 908g |
Features:, , Introduction:, , Kindly Remark:,
Specifications : Two 15 volts power outputs, up to 20 ...SDSHobby
EFUEL RC MODEL AC 220V DC9-18V 30A ADAPTOR POWER
| Input Voltage | 220-240V AC (Part No.PSU30ADE,PSU30AE) |
| Input AC Frequency | 50Hz/60Hz |
| Output Voltage | 9-18V DC±0.5V |
| Output Current | 30A±1A |
| Current Overload Protection | ≤31A 500MS |
| Input Fuse | 220V AC 5A Fuse |
| LCD Display | Voltage Precision ±0.3V |
| Output Voltage Ripple | <100MV |
| Power Efficiency | >80% |
| Power Factor | >0.7 |
| Over Temperature Protection | <100°C |
| Cooling Method | Cooling Fan |
| Operating Temperature | 0-40°C |
| Operating Humidity | 0-90% |
| Dimensions (L*W*H) | 208x139x59.5mm |
| Net weight | 1.50kg |
Specifications:,
Current Precision ±0.5ASDSHobby
DIY HACKSAW FOR RC MODEL WITH LENGTH 25CM
Specifications:, Total Length:, 5CM, Total Width:, 10CM, Material:, plastic handle, metal bracket, Color:,
Red & Black, Black & Yellow (sent randomly)SDSHobby
DJ80-V2 80CC GAS ENGINE/ PETROL ENGINE WITH SINGLE CYLINDER FOR RC GAS AIRPLANE
| 30 (lube oil) | 1 (gasoline) |
Performance & Parameters:, Spark Plug:, NGK CM-6, Carburetor:, Walbro (made in Japan), Displacement:, 80CC, Output Power:, 8.2HP/8000rpm, Weight:, 1800g (NOT Including CDI and Muffler), Cylinder Diameter:, 52mm, Stroke:, 38mm, RPM Range:, 1200 to 8000RPM, Recommended Propeller:, 3*10~26*8 (NOT Included), Compression Ratio:, 7.8, Mixture Ratio:, Package Contents:, Kindly Remark:,
DJ80-V2 engine*1pcs Exhaust Pipe*1pcs Rcexl CDI Ignition*1pcs Installation Parts*1pcs Propeller ...